四川君见玮贸易有限公司

Sichuan Junjianwei Trading Co., Ltd

短杆白轮图片_短杆白轮生产厂家_君见玮脚手架厂家

JUNJIANWEI

短杆白轮
Pedal hook

产品图片
Product image

产品适用方案

Product applicability plan

短杆白轮的使用规范

Specification for the use of short pole white wheels

脚手架短杆白轮万向轮是一种常见的脚手架配件，用于支撑和移动脚手架。为了确保脚手架万向轮的正确使用，需要遵守以下规范：

1. 在安装万向轮时，必须确保轮子的安装位置正确，符合厂家设计要求，同时支架必须有足够的强度，符合使用时的承重量。
2. 脚手架万向轮的功能不可被改变，也不受安装装置的影响。固定脚轮之间必须与其轮轴在一条直线上，如果仅使用旋转脚轮，它们必须一致。如果固定脚轮与旋转脚轮配合使用，那么全部脚轮必须彼此兼容，并且须经制造商建议使用。
3. 安装完成后，必须检查脚手架是否平稳、结构牢固。如果发现问题，需进行调整或者重新组装。
4. 使用时，脚手架应放置在坚实平稳的地面上，不宜放置在坑洼或不平的地面。同时，应正确搭设梯级，工作人员应穿好安全带，并绑好防滑鞋。
5. 脚手架操作人员应按照规定工作范围进行作业，并确保操作安全。在使用期间，禁止随意移动或加装不同于原设计的配件。
6. 脚手架安全锁、卡板、连接件等部位应及时检查，如有问题及时更换或修理。
7. 在拆卸脚手架时，必须按照拆卸步骤进行。先清理周围工作区域，移除铺设材料和工具等物品。然后按照逆序拆卸脚手架并进行分类存放。过程中应注意人员的安全，在拆卸时需防止零部件掉落而伤人。

总之，只有保持脚手架万向轮的结构稳定和连接器紧密，使用时注意安全，才能更好地保障施工质量和施工人员的安全。同时，在拆卸脚手架时也要十分谨慎，避免意外发生。

Scaffolding short pole white wheel universal wheel is a common scaffolding accessory used to support and move scaffolding. In order to ensure the correct use of scaffolding universal wheels, the following specifications need to be followed:

1.When installing the universal wheel, it is necessary to ensure that the installation position of the wheel is correct and meets the manufacturer’s design requirements. At the same time, the bracket must have sufficient strength and meet the load-bearing capacity during use.
2.The function of the scaffold universal wheel cannot be changed and is not affected by the installation device. The fixed casters must be in a straight line with their axle, and if only rotating casters are used, they must be consistent. If fixed casters are used in conjunction with rotating casters, all casters must be compatible with each other and must be recommended for use by the manufacturer.
3.After installation, it is necessary to check whether the scaffold is stable and structurally firm. If any problems are found, they need to be adjusted or reassembled.
4.When in use, the scaffold should be placed on a solid and stable ground, and should not be placed on potholes or uneven ground. At the same time, steps should be set up correctly, and staff should wear seat belts and tie up anti slip shoes.
5. Scaffold operators should operate within the prescribed scope of work and ensure safe operation. During use, it is prohibited to move or install accessories that are different from the original design at will.
6. Scaffold safety locks, clamps, connectors, and other parts should be inspected in a timely manner. If there are any problems, they should be replaced or repaired in a timely manner.
7.When dismantling scaffolding, it is necessary to follow the dismantling steps. First, clean the surrounding work area and remove laying materials, tools, and other items. Then dismantle the scaffolding in reverse order and store it in categories. Attention should be paid to personnel safety during the process, and it is necessary to prevent parts from falling and injuring people during disassembly.
In short, only by maintaining the stability of the structure of the scaffold universal wheel and the tightness of the connectors, and paying attention to safety during use, can the construction quality and the safety of construction personnel be better guaranteed. At the same time, great caution should be exercised when dismantling scaffolding to avoid accidents.

如您有意咨询请给我们君见玮致电
我们期待您的来电！

咨询电话：18733020585

脚手架的常用的类型有哪些

脚手架的种类有很多：

1、按照材料可分为：竹质、木质和钢管三种材质的脚手架；2、按照用途可分为：作业脚手架、防护脚手架和承重和支撑脚手架；3、按照架构方式可分为：杆件组合式脚手架、框架组合式脚手架、格构件组合式脚手架和台架；4、按照设置形式可分为：单排脚手架、双排脚手架、多排脚手架、满堂脚手架、交圈脚手架和特型脚手架；5、按照搭设位置可分为：内脚手架和外脚手架；6、按照紧固方式可分为：扣件式、门式、碗扣式和盘扣式脚手架。

There are many types of scaffolding:
1. Scaffolds can be divided into three types based on materials: bamboo, wood, and steel pipes; 2. According to their purpose, they can be divided into: operational scaffolding, protective scaffolding, and load-bearing and supporting scaffolding; 3. According to the architecture, it can be divided into: pole combined scaffolding, frame combined scaffolding, grid component combined scaffolding, and scaffolding; 4. According to the setting form, it can be divided into: single row scaffolding, double row scaffolding, multi row scaffolding, full hall scaffolding, cross circle scaffolding, and special type scaffolding; 5. According to the installation location, it can be divided into: internal scaffolding and external scaffolding; 6. According to the fastening method, it can be divided into: fastener type, door type, bowl type, and plate type scaffolding.

脚手架是做什么用的呢

它的主要作用是让工人在高空施工时更加便捷，而且还能够起到维护工人安全的效果，它既能够当做操作架，又可以算作保护架，能够承受其自身、安全网、栏杆、工人等等的重量，注意它无法负担结构、起重机、以及大量材料的重量。

Its main function is to make workers more convenient during high-altitude construction, and also to maintain worker safety. It can be used as both an operating frame and a protective frame, capable of bearing the weight of itself, safety nets, railings, workers, etc. Note that it cannot bear the weight of structures, cranes, and a large amount of materials.

脚手架钢跳板规格

一、钢跳板介绍

脚手架钢跳板是脚手架上用于行走和施工的板材，一般可以分为钢制脚手板，建筑钢跳板，钢踏板，镀锌钢跳板，热镀锌钢踏板，在造船业，石油平台、电力、建筑业被推广使用。

二、钢跳板的选择：

在选择脚手架钢跳板时，需要按照具体的施工需求和要求来确定合适的规格和材质，以确保安全和施工的高效完成。同时，脚手架钢跳板在使用过程中应定期检查维护，以保证其使用寿命和安全性。

1、 Introduction to Steel Springboard
Scaffold steel springboard is a board used for walking and construction on scaffolding, which can generally be divided into steel scaffold boards, construction steel springboards, steel pedals, galvanized steel springboards, and hot-dip galvanized steel pedals. It is widely used in shipbuilding, oil platforms, power, and construction industries.
2、 Selection of steel springboard:
When selecting scaffolding steel springboards, it is necessary to determine the appropriate specifications and materials according to specific construction needs and requirements to ensure safety and efficient completion of construction. At the same time, the steel springboard of the scaffold should be regularly inspected and maintained during use to ensure its service life and safety.

建筑脚手架中带踏板的种类

一、门式脚手架门式脚手架是一种结构简单、架设方便的脚手架，常用于建筑施工和维护。它的主要特点是支撑臂和立柱之间采用门式结构，结构牢固，能承受较重的荷载。踏板通常位于脚手架的水平支撑臂之上，方便施工人员上下，提高施工效率。

二、悬挑式脚手架悬挑式脚手架是一种挂在建筑物外部的脚手架，常用于外墙装修、喷涂等作业。它采用吊臂和吊杆等构件将脚手架悬挂在建筑物外部，以支撑和固定脚手架。踏板通常位于脚手架的水平支撑臂之上，方便施工人员上下，并且在踏板上增加防滑设计，保证施工人员的安全。三、斜杆脚手架斜杆脚手架是一种采用斜杠作为支撑的脚手架，它适用于不规则建筑物外墙和内部空间，如音乐厅、电视塔等。斜杆脚手架使用斜杠连接立柱和支撑梁，形成一个支架框架，支撑面积大，能承受较大的荷载。踏板和支撑棒通常位于同一高度，以方便施工人员上下移动。总之，带踏板的脚手架在建筑工程中起到了至关重要的作用，提高了施工效率，同时也保障了施工人员的安全。在选择脚手架时，应根据实际情况选用适合的脚手架种类，以确保施工质量和施工安全。